Ronda Bradford. Furniture. February 01st , 2018.
Choosing Industrial Furniture: While choosing industrial furniture keep in mind that the industrial era used materials that were bulky and heavy such as solid wood and steel. These pieces were made to last for years and took alot of wear and tear. You can still find some of these peices today. Their worn, weathered look gives them character and adds a bit of drama to any space. They may be covered in leather, heavy denim, linen, cotton ticking or wool. Besides wood and steel you may find pieces made of galvanized metal and iron with muted industrial paint and powder-coated finishes.
Fitting your space. Not everyone lives in a big open planned space, with all the furniture perfectly fitting to the room. Especially in apartments the space will always be a constraint and buying furniture for these space will be hectic. So customised furniture will come for the rescue and can be well managed with all factors.
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
Most of the clout natural materials hold as bases for both indoor and outdoor furniture stem from their long production history. Some of the fibres used to produce outdoor furniture in the 21st century are exactly the same used by the Ancient Egyptians when they first began using the technique of weaving, several centuries before Christ. This traditional aspect is appealing to most home-owners, and goes a long way towards explaining the significant popularity these materials continue to enjoy to this day.
Finding suitable replacement materials for inlay and boulle antiques is an even greater problem. They tend to use more complex and varied materials. Antique and second-hand shops often have boxes containing suitable oddments and it is worth searching through them to find matching pieces. As a last resort, missing pieces of inlay can be built up with synthetic resins or wax, coloured to match. If boulle has lifted seriously or is bent, leave the repair to an expert restorer; but if the lifting is only slight, carefully remove the section and scrape clean all the dirt. Stick with an epoxy resin adhesive and weight it down until the glue has dried.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Chewa claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.