Rae Holmes. Furniture. October 09th , 2017.
Most of the clout natural materials hold as bases for both indoor and outdoor furniture stem from their long production history. Some of the fibres used to produce outdoor furniture in the 21st century are exactly the same used by the Ancient Egyptians when they first began using the technique of weaving, several centuries before Christ. This traditional aspect is appealing to most home-owners, and goes a long way towards explaining the significant popularity these materials continue to enjoy to this day.
Of these, resin-based synthetic rattan is of course the most popular, as well as the most widespread across public consciousness; however, unlike what many home-owners might think, not every rattan garden furniture item is made of the same type of synthetic polymer. Much to the contrary, rattan items on the market can be made out of any one of four types of resin: polyethylene, polypropylene, PVC or nylon.
If you love the industrial style there is no shortage of places to find some wonderful pieces for your home or commercial business. The Internet is loaded with websites that offer some great finds that can be mixed and matched with most decorating styles of today. If you have an idea of what you want, or even if you don't, I urge you to browse for your perfect piece and let it fill a place in your home today.
Packing: Good packing can ensure that the furniture will be as beautiful as it was when it was stored. As a first step, you can disassemble beds and tables before storing. You can apply a coat of wax to protect its sheen. All the screws, bolts, and nuts should be placed in a clear plastic bag and tied to the bed frame. A quilt can be wrapped around tabletops and headboards to prevent denting and scratching.
Wood veneers can be difficult to match. It is possible to buy new veneer strips, but they are generally thinner than the old hand-sawn veneers and do not always match in colour. It often pays to go to an auction to look for a broken oddment of furniture that has suitable veneers. To remove a veneer from its backing, first clean off any old polish with white spirit and carefully clean the varnish or wax. Place a damp cloth over the cleaned strip and press with a fairly hot iron. Keep the cloth damp. This melts the Scotch glue holding down the veneer, which can then be peeled off. The same technique is used to raise small areas on the antique piece, but use a soldering iron instead of an iron. Wipe all traces of glue while it is still warm. Dampen the veneer and flatten it between two pieces of wood for about 24 hours before use. Do not let it dry completely, for veneers must be re-laid while still damp and pliable. The replacement veneer should be slightly thicker than the existing one, to allow for sanding. Stick the new strip down with Scotch glue and apply a weight or clamp until the glue has completely set. Wax and polish to match the existing finish.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Chewa claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.