Jacquelyn Parks. Furniture. May 05th , 2017.
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
Uniqueness. Being mass produced store bought furniture will hardly have any difference from one piece to another as it will not be a one of a kind. Owning a customised furniture you will be the only person who has it and will reflect your particular taste on it.
If your a do-it-your-selfer you can find websites that help you create a special piece for your home. In this way you save some money and you get a sense of accomplishment for having created the item yourself. Keep in mind that you may want to start with something small such as a lamp or other accessory. I have seen bigger projects that look very interesting and a bit challenging so make sure you don't get in over your head and waste money on materials you won't use.
Cover the sofas with a cotton sheet and place them on a plastic sheet. Light chairs can be stacked on top of the other. But secure them carefully so that they don't trip and damage other items. You can use mattresses as buffers between each item.
Choosing Industrial Furniture: While choosing industrial furniture keep in mind that the industrial era used materials that were bulky and heavy such as solid wood and steel. These pieces were made to last for years and took alot of wear and tear. You can still find some of these peices today. Their worn, weathered look gives them character and adds a bit of drama to any space. They may be covered in leather, heavy denim, linen, cotton ticking or wool. Besides wood and steel you may find pieces made of galvanized metal and iron with muted industrial paint and powder-coated finishes.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Chewa claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.